|
| Customer Service
|
|
|
|
4610-JS10-601201
Product Specifications
When using tap water
Substance Name Total Filtered Water Volume
Free Residual Chlorine 8,000 L
Water Purification Capacity Turbidity 8,000 L
CAT (Pesticides) 8,000 L
2-MIB 8,000 L
*Total filtration capacity based on JIS S3201 test results, with a removal rate of 80% or higher
Substances Removed PFOS, PFOA 8,000 L *2
*2 Value representing an 80% removal rate according to the standards set by the Japan Water Purifier Association (JWPA) (JWPAS B Standard)
Filter Cartridge Replacement Guide
Total filtered water volume: 8,000 L (Approx. 1 year when using 20 L per day)
When using source water other than tap water
SESERA can be used with Class I and Class II source water.
Do not use source water classified as Class III. (See below)
Disaster Water Sources: Class I
*As a guideline, water stored for 10 days or less
① Expired bottled water
② Water from toilet tanks (stored for 10 days or less)
③ Bathwater that has not been used for bathing (stored for 10 days or less)
④ Water storage tanks in buildings and apartment complexes (stored for 10 days or less)
⑤ Emergency water storage tanks (stored for 10 days or less)
⑥ Stored tap water (stored for 10 days or less)
⑦ Stored potable well water (stored for 10 days or less)
Disaster Water Sources Category II
*Water stored for medium to long-term periods
① Managed stored rainwater
② Managed pool water
③ Bathwater without added bath salts or detergents
④ Water from toilet tanks (stored for 11 days or more)
⑤ Water storage tanks in buildings and apartment complexes (stored for 11 days or more)
⑥ Emergency water storage tanks (stored for 11 days or more)
⑦ Stored tap water (stored for 11 days or more)
⑧ Stored potable well water (stored for 11 days or more)
Disaster Water Sources Category III (Do not use as raw water)
* Natural water sources, etc., where water quality is not managed under normal conditions
① Water from lakes and ponds
② River water
③ Well water not confirmed as potable
④ Unmanaged rainwater
⑤ Unmanaged pool water
⑥ Water from fire protection tanks
⑦ Water from reservoirs
⑧ Tap water prior to restoration (turbid water before restoration)
Filtration flow rate: 2.0 L/min Minimum operating water pressure: 0.01 MPa
|
|
|
|
